Module:Data/BuildingMaterial/InOutput

Documentation for this module may be created at Module:Data/BuildingMaterial/InOutput/doc

return {
    {
        name = 'DirtToBuildingMaterial',
        machine = 'AutomaticHammer',
        input = {
            {'DirtSurface', 1},
        },
        output = {
            {'BuildingMaterial', 1},
        },
        ticks = 100,
        tier = 1,
    },
    {
        name = 'BuildingMaterial2',
        machine = 'Mixer',
        input = {
            {'GravelSurface', 1},
            {'SandSurface', 1},
            {'Water', 500},
        },
        output = {
            {'BuildingMaterial', 10},
        },
        ticks = 60,
        tier = 2,
    },
    {
        name = 'BuildingMaterial3',
        machine = 'Mixer',
        input = {
            {'GravelSurface', 1},
            {'SandSurface', 1},
            {'Water', 500},
            {'SteelParts', 2},
        },
        output = {
            {'BuildingMaterial', 20},
        },
        ticks = 60,
        tier = 3,
    },
    {
        name = 'BuildingMaterial4',
        machine = 'Mixer',
        input = {
            {'GravelSurface', 1},
            {'SandSurface', 1},
            {'Water', 500},
            {'TitaniumParts', 2},
        },
        output = {
            {'BuildingMaterial', 40},
        },
        ticks = 60,
        tier = 4,
    },
    {
        name = 'BuildingMaterial5',
        machine = 'Mixer',
        input = {
            {'GravelSurface', 1},
            {'SandSurface', 1},
            {'Water', 500},
            {'CompositeParts', 2},
        },
        output = {
            {'BuildingMaterial', 80},
        },
        ticks = 60,
        tier = 5,
    },
    {
        name = 'BuildingMaterial6',
        machine = 'Mixer',
        input = {
            {'GravelSurface', 1},
            {'SandSurface', 1},
            {'Water', 500},
            {'NeutroniumParts', 2},
        },
        output = {
            {'BuildingMaterial', 160},
        },
        ticks = 60,
        tier = 6,
    },
    {
        name = 'BuildingMaterial',
        machine = 'Hand',
        input = {
            {'StoneSurface', 1},
        },
        output = {
            {'BuildingMaterial', 1},
        },
        ticks = 10,
    },
}